Edge-core Cloud Data Center Switch EXP100-32X
- 32 x 100G QSFP28 ports, each can breakout to 2 x 50G, 4 x 25G, or 4 x 10G.
- High performance, low power, low latency.
- Fully programmable SDN data center switch designed for data center, cloud, and AI networks.
Edge-core Cloud Data Center Switch Edge-core EXP100-32X
3.2T Data Center Switch
Edge-core EXP100-32X
32 x 100G QSFP28 ports, each can breakout to 2 x 50G, 4 x 25G, or 4 x 10G.
High performance, low power, low latency, fully programmable SDN data center switch designed for data center, cloud, and AI networks.
Features
- Supports 3.2 Tbps full-duplex throughput
- Supports 25G NRZ SerDes with a retimer-less design
- The 32 x 100G QSFP28 ports can breakout to 2 x 50G, 4 x 25G, or 4 x 10G
- UEC-ready programmable congestion measurement and signaling to facilitate dynamic load balancing and fast failure detection and recovery
- UEC-ready weighted congestion-aware dynamic load balancing for reducing tail latency
- Support front to back airflow; PUSs and fans redundancy
- Preloaded with ONIE, supports Xsight OS and Community SONiC
- Fully Programmable
Overview
The Edgecore EXP100-32X is a high-performance, low-power, low-latency, fully-programmable SDN data center switch designed for data center, cloud, and AI networks.
Leaf or ToR switch
The EXP100-32X is a 32-QSFP28-port switch in a 1RU form factor. Each of the QSFP28 ports can breakout to 2 x 50G, 4 x 25G, or 4 x 10G, optimizing compute racks by enabling 25Gbps-per-lane server links and 100G uplink optics. The device is an ideal leaf or ToR switch for cloud data center operators that are driving the rapid adoption of 100Gbps optical modules while also upgrading compute server NICs to 100Gbps speeds.
Xsight Instruction Set Architecture (ISA)
The EXP100-32X also supports Xsight Instruction Set Architecture (ISA) for users to define flexible packet processing rules,routing protocols, and network policies. The programmability is also an important underlying capability for many of the advanced features, including queue management, congestion control, and telemetry. The programmability handles newly-defined notification mechanisms, such as the Ultra Ethernet Transport (UET) protocol, packet trimming, and back-to-sender signaling.
Dynamic Load Balancing (DLB)
Optimized for interconnecting AI/ML, storage, and compute clusters in data centers, the EXP100-32X supports congestion-aware routing, which comprises measuring and signaling congestion as well as load balancing across the network fabric. For a given fabric link, the EXP100-32X can measure flow rate, latency, and queue level. When congestion is detected, it can signal using Explicit Congestion Notification (ECN), Congestion Signaling (CSIG), or other customer-defined mechanisms. The EXP100-32X can handle flowlet-based load balancing and packet spraying across fabric links, as well as traditional flow-based approaches like ECMP.
Specifications Edge-core EXP100-32X
| Switch Ports | 32 x QSFP28 |
| Switch Silicon | Xsight Labs X2 |
| Processor | Intel® Xeon® D-1713NTE 4-Core 2.2GHz |
| BMC | Optional |
| Memory | 32GB DDR4 SO-DIMM with ECC |
| Storage | 1TB m.2 2280 NVMe SSD |
| Latency | 755 ns |
| Rack | 1 RU form factor |
| Timing and Sync | Optional |
| Fans | 5+1 hot-swappable redundant fans front to back |
| Storage Temperature | -40°C – 70°C (-40°F – 158°F) |
| Operating Temperature | 0°C – 40°C (32°F – 104°F) |
| PSU | 2 redundant, load-sharing, hot-swappable AC PSUs |
| Power Draw | Maximum 863W |
Compatible Software Option:
- EXP-OS
Compatible Transceivers:
- 100G SR4
- 100G LR4
- 100G DR1
- 100G FR1
- 100G LR1
Compatible Cables
- 100G DAC
- 100G AOC
Đánh giá
Chưa có đánh giá nào.