Astro Digital Video Generator VG-879-B. Astro Design (made in Japan).
Features
■ 8K/60p YCbCr 4:2:0(12-bit), 4K/120p YCbCr 4:4:4(12-bit) transmission by HDMI 2.1
■ 4K/60p is transmitted by one channel of 12G-SDI.
■ Max.4 slot-type interface units can be selected from HDMI 2.1, 12G-SDI, HDMI2.0b 3G or 6G, DisplayPort 1.2a, V-by-One and Analog.
■ By synchronizing 4 or 2 units of VG-879, 8K/120p or 8K/60p signals are supported by V-by-One® HS.
■ HDMI 2.1 test functions supported
CTA-861-G Timing Format including 8K/60p YCbCr 4:2:0 and 4K/120p YCbCr 4:4:4
eARC/ARC status check
SCDC, FRL link status check
ITU-R BT.2020 color bar and video output setting
HDR Test Patterns supported
HDCP 1.4/2.3 certification test
■ HDMI 2.1 Pre Compliance Test (MOI)
■ High bit Rate Audio Generation (VT-8500-0006)
■ Optional 8K Evaluation Image(VT-7010).

Specifications
HDMI 2.1 unit (VM-1876B-MD)
■ Signal generation by FRL (Max.48Gbps) and TMDS (Max. 18Gbps) modes.
■ Uncompressed 8K/60p YCbCr4:2:0 and 4K/120p YCbCr4:4:4 signal.
■ HDCP1.4/2.3
■ Supports DSC1.2.
■ HDMI2.1 Compliance Test.

|
Connector
|
HDMI x 1 |
| Data Rate | Max. 48Gbps (FRL), Max 18Gbps (TMDS) |
| Video Timing Standard | RGB, YCbCr 4:4:4, 4:2:2, 4:2:0 |
| Color Depth | 8, 10, 12, bit |
| HDCP | Ver. 2.3 / 1.4 |
| Audio Format | HDMI : L-PCM, AAC, AC3 Option : VT-8500-0006 (Dolby Digital Plus, DTS HD, etc.) COAX OUT : for ARC and eARC |
HDMI 6G & HDCP2.3 unit (VM-1876-M8)
■ 4K/60p (RGB/YCBCR 4:4:4) output from each channel.
■ HDCP2.3 and 1.4 are selectable.
■ HDMI2.0 Compliance Test (CTS).

| Video |
Connector
|
HDMI x 2ch (CEC, 3D, ARC, HDCP(1.4&2.3) supported) |
| Timing format | CEA-861F (except VIC91 and 92) Standard timings only. |
|
| Pixel clock | Max. 600MHz (Max. 6Gbps) | |
| Audio | Output | HDMI : 8ch |
| Internal | Sine wave, Compressed Audio (AAC/AC3 and optional HBR audio) |
HDMI unit (VM-1876-M7)
■ 4K/60p(YCBCR 4:2:0) output is supported.
■ 8K/30p is supported by using 4ch.
■ HDCP2.3 and 1.4 are supported. (following sink capability)

| Video |
Connector
|
HDMI x 4ch (CEC, 3D, ARC) |
| Timing format | CEA-861F (max. 300MHz or 4K 4:2:0 format) Standard Timings only. | |
| Dot Clock(Data Rate) | Max. 300MHz (Max. 3Gbps) | |
| HDCP | Ver1.4 and Ver2.3 | |
| Audio | Output | HDMI : 8ch |
| Internal | Sine wave, Compressed Audio (AAC/AC3 and optional HBR audio) |
HDMI 3G unit (VM-1876A-M0)
■ 4K/60p(YCBCR 4:2:0) output is supported.
■ 8K/30p is supported by using 4ch.
■ HDCP1.4 is supported.

| Video |
Connector
|
HDMI x 4ch (CEC, 3D, ARC, HDCP(1.4) supported) |
|
Timing format
|
CEA-861F (max. 300MHz or 4K 4:2:0 format) Programmable timings. | |
|
Dot Clock(Data Rate)
|
Max. 300MHz (Max. 3Gbps) | |
| Audio |
Output
|
HDMI : 8ch, COAX : 1ch (for ARC test) |
| Internal | Sine wave, Compressed Audio (AAC/AC3 and optional HBR audio) |
DisplayPort unit (VM-1876A-M1)
■ DisplayPort Ver.1.2a based. 4K/60p is transmitted by single channel.
■ SST (Single Stream Transport) and MST (Multi Stream Transport) are supported.
■ 4K/120p output is available by using 2 ports.
■ HDCP is not supported.

| Video |
Connector
|
DisplayPort×2ch |
|
Timing format
|
VESA DisplayPort Standard Ver.1.2a | |
|
Dot Clock(Data Rate)
|
Max. 600MHz | |
|
Video Format
|
RGB, YCBCR 4:4:4 / 4:2:2 | |
|
Color Depth
|
8,10,12-bit (*Only YCBCR 12-bit is available on 12-bit output) | |
| Audio |
Output
|
DisplayPort (8ch) |
V-by-One HS unit (VM-1876-M2)
■ 4K/120p and 8K/30p are transmitted by one unit.
■ 8K/120p (4 pcs of 4K/120p) is transmitted by 4 slot units in one VG-879.
■ This unit requires custom made cables. Please contact your local agents for details.

| Video |
Connector
|
4ch (4Lanes per channel, maximum 16Lanes by all 4ch) |
| Dot clock | 8bit/10bit : 20 to 85MHz per lane, 12bit : 20 to 75MHz per lane | |
| Colors | 8, 10, 12bit | |
| Format | RGB, YCBCR 4:4:4 |
12G-SDI unit (VM-1876-MB)
■ 4K/60p is transmitted by one channel of 12G-SDI, two channels of 6G-SDI or four channels of 3G-SDI.
■ The payload is editable.
■ Eight channels of audio and time code packet can be embedded.
■ This unit is installed in VG-879 only.

| Video Out
|
Interface | BNC×4ch |
| Video Format | 12G-SDI SMPTE 2082-0 | |
| 6G-SDI SMPTE 2081-0 | ||
| 3G-SDI SMPTE 425M, 428.1M | ||
| HD-SDI SMPTE 274M, 296M, 372M, 428.1M | ||
| SD-SDI SMPTE 259M | ||
| Color depth | 10, 12-bit (depends on timing format) | |
| Audio Out | 48kHz sampling (Max. 8ch embedded) | |
| Payload | SMPTE 352M | |
| Time Code | Free-run time code | |
HDBaseT Unit (VM-1876-MC)
■ HDBaseT2.0(HDMI1.4) compliant. 4K/30p and 1080p signal can be transmitted by single LAN cable.

| Connector | 4ch (RJ-45/LAN) | |
| Video | HDMI | Ver1.4b (CEA-861-E) |
| TMDS Clock | Max. 300MHz | |
| Video Format | RGB, YCbCr4:4:4, 4:2:2, 4:2:0 | |
| HDCP | Ver1.4 | |
| Audio | HDMI | 2ch |
| Source | Internal sine wave, Compressed audio | |
iTMDS Unit (VM-1876-M9)
■ Able to support 4K/60p by one unit, 4K/120p (Cross split, Vertical 4-Split) by two units.
■ 4K/60p LVDS output is possible by using two sets of IA-1540 converter.

| Video Out | DVI-I (Digital output only) | |||
| Dual Link×2 | ||||
| Dot Clock | DVI Mode | 8-bit | 25-165MHz: Single Link 50-330MHz: Dual Link |
|
| iTMDS Mode | 8 to 10-bit | 25-165MHz: Single Link 50-330MHz: Dual Link |
||
| 12-bit | 25-150MHz: Single Link 50-330MHz: Dual Link |
|||
| Multi channel Mode | 10 to 16-bit | 25-165MHz: Dual Link 50-330MHz: Quad Link |
||
| 4K×2K (Full HD 240MHz) mode | 8 to 12-bit | 297-660MHz: Quad Link | ||
| Timing Setting | limitation | Cross split: setting unit 4 dot, 2 line Vertical 4-Split: setting unit 8 dot, 1 line |
||
| Video Format | RGB / YCBCR 4:4:4 | |||
| E-EDID | Ver.1.3(DDC2B) | |||
Analog unit (VM-1876-MA)

| Video Out |
Interface
|
Component, Composite, VGA |
| Color | RGB / YPBPR | |
| Colors (MAX) | RGB each 8-bit | |
| Dot Clock | 5 to 165MHz | |
| HDTV | 1080p / 1080i / 720p | |
| SDTV | NTSC / PAL | |
| PC | Programmable / Internal Timing | |
| Functions | Teletext, Closed Caption, V-chip, Macrovision (Option) | |
| Audio Out | Interface | RCA×2ch |
| Channel | 2ch L / R | |
| Frequency | 32, 44.1, 48, 88.2, 96, 176.4, 192kHz | |
| Output Level | 0 to 4000mV |
Synchronizing unit (VM-1876-MX)
■ 8K/120p timing is output by synchronizing four units of VG-879 by V-by-One® HS.
■ Please install one video interface and one synchronizing unit in each VG-879.

| Interface | Multilink Input×1ch, Output×1ch |
VG-879 (General Specification)
| General specification | |
|---|---|
|
Power voltage
|
AC100 to 240V, 50/60Hz |
| Power consumption | 260W MAX |
| Dimensions | 430(w)x177(H)x310(D)mm (excluding projected parts) |
| Operating temperature range | +5 to 40℃ |
| Operating humidity range | 20 to 80% (no condensation) |
Rear View

Options
■ TIFF 10/12-bit image converting software (SP-8871)
■ HDMI One Bit Audio and High Bit Rate Audio (VT-8500-0006)
■ MPEG-4 AAC Audio (22.2ch supported) (VT-8500-0021)
■ Luminance measuring software for Konica Minolta Spectroradiometer CS-2000 (SP-8870-BM)
■ 8K/4K HDR Image Library with 8K Monoscope (VT-7010) [Data Sheet]
■ 8K/4K HDR Image Library with HDR scale patterns (VT-7009) [Data Sheet]
■ ITU-R BT.2020 (8K and 4K) Image Library (ITE images) (VT-7007) [Data Sheet]
■ Dolby Vision Image Library (VT-7012)
■ HDR10+ Test Programs (VT-7013)
■ DVI/iTMDS to LVDS converter (IA-1540)


admin –
5stars