Edgecore 25.6T Data Center Switch DCS520

Liên hệ

AS9736-64D
64 x 400G QSFP56-DD switch ports with Tomahawk 4.
Spine Switch for High-performance Data Center

Mô tả

25.6T Data Center Switch DCS520


400G High Bandwidth	Low Latency	Resiliency	High Port Density

The Edgecore DCS520 is a spine switch for high-performance data centers. The switch provides line-rate L2 and L3 switching across the 64 x QSFP56-DD ports, each supporting 1 x 400G QSFP56-DD, 1 x 100G QSFP28, 1 x 40G QSFP+ or, via breakout cables 2 x 200G (2 x 4 lanes 50G PAM4), 4 x 100G (4 x 2 lanes 50G PAM4), 2 x 50G (2 x 2 lanes 25G NRZ), 4 x 25G NRZ, or 4 x 10G NRZ. The DCS520 can be deployed as a spine switch supporting 100/400 GbE spine to spine or spine to leaf interconnects. This open network switch is loaded with the Open Network Install Environment (ONIE), which supports the installation of compatible Network Operating System software, including the open source options Open Network Linux, plus commercial NOS offerings.

Features

QSFP56-DD switch ports, each supporting 1 x 400G QSFP56-DD, 1 x 100G QSFP28, 1 x 40G QSFP+, or via breakout cables 2 x 200G (2 x 4 lanes 50G PAM4), 4 x 100G (4 x 2 lanes 50G PAM4), 2 x 50G (2 x 2 lanes 25G NRZ), 4 x 25G NRZ, or 4 x 10G NRZ.
Incorporates Broadcom Tomahawk 4 switch series silicon.
2 RU form factor.
Supports hot/cold aisles with front-to-back airflow SKU.
All ports on front; PSUs and fans accessible from rear.
Hot-swappable, load-sharing, redundant 2400 W AC/HVDC PSUs.
3+1 redundant, hot-swappable fan modules.
Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of compatible open source and commercial NOS offerings.